Researched comparisonLast updated October 2026 · How we review
Disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from links on this page, at no extra cost to you. We only recommend products from established brands.
Quick Answer
The Hein-Werner HW93503 is our pick for a home garage: it has the tallest maximum height here at 19 inches, the largest base at 7-1/2 by 9 inches and the longest warranty at 2 years. The Sunex 1003C is ASME PASE-2019 compliant and reaches 17 inches. The BIG RED T43002 from Torin has the lowest price by a wide margin for occasional tire and brake jobs.
- Hein-Werner HW93503 3 Ton Jack Stands (Pair): best for home mechanics who want the tallest lift here, 19 inches, on the largest base
- Sunex 1003C 3 Ton Heavy Duty Ratcheting Jack Stands (Pair): best for buyers who want ASME PASE-2019 compliant stands that reach 17 inches
- BIG RED T43002 Torin 3 Ton Steel Jack Stands (Pair): best for occasional DIYers who want a 3 ton pair for tire and brake jobs on cars
Prices as of October 18, 2026, 7:13 am CT.
Jack stands hold a car up once a floor jack lifts it, so they are the part of the job you trust while you are underneath. We compared three 3 ton ratchet jack stand pairs from BIG RED (Torin), Sunex and Hein-Werner, each sold as a pair for cars and light trucks.
How We Chose
We picked three well-known garage tool brands and matched the size class: all three are 3 ton steel ratchet stands sold as a pair. They are not identical. Hein-Werner and BIG RED state the 3 ton capacity per pair, while the Sunex page lists a 3 ton load capacity without saying per pair or per stand. The lift ranges and base sizes differ, and only Sunex states ASME PASE compliance for this model on its page. Two weights come from the Amazon listings, marked with an asterisk. Specs come from each manufacturer’s own pages, spec sheets and manuals, and each card lists the warranty from the manufacturer’s own pages. Prices are the Amazon prices on the date shown.
The Lineup
Specs come from each manufacturer’s own pages, spec sheets and manuals. * Value from the Amazon listing. † Sunex 1003C: the spec table lists 11.625 to 17 in, while the page’s feature list says 11.5 to 17.4 in. ‡ Hein-Werner HW93503: the spec sheet lists 12-1/8 to 19 in and a 7-1/2 x 9 in base, while the owner’s manual lists 12 to 19 in and a 9 x 7-1/4 in base. Prices as of October 18, 2026, 7:13 am CT. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product. Amazon may show a different seller than the brand or Amazon.com. Certain content that appears on this site comes from Amazon. This content is provided “as is” and is subject to change or removal at any time.
Hein-Werner HW93503 3 Ton Jack Stands (Pair)
$153.97 as of Oct 18, 2026, 7:13 am CT on Amazon · Tallest, largest base, 2 year warranty
Best for: home mechanics who want the tallest lift here, 19 inches, on the largest base
Hein-Werner’s spec sheet for the HW93503 lists 3 tons capacity per pair, a 12-1/8 to 19 inch range in 5/8 inch steps, a multi position ratchet bar, a 7-1/2 by 9 inch base and a gross weight of 26 pounds for the pair, and says it is assembled in the US with US and global components. The owner’s manual repeats that capacity is per pair only. We like it for trucks and SUVs that sit higher, because the 19 inch top height gives more room to work underneath.
Warranty: 2 years limited
Check Price on Amazon →Sunex 1003C 3 Ton Heavy Duty Ratcheting Jack Stands (Pair)
$84.55 as of Oct 18, 2026, 7:13 am CT on Amazon · ASME PASE-2019 compliant
Best for: buyers who want ASME PASE-2019 compliant stands that reach 17 inches
Sunex’s page for the 1003C lists a pair of 3 ton heavy duty ratcheting jack stands with a handle and pawl system that locks the column in place, a 6.75 by 8 inch base and a range of 11.625 to 17 inches in its spec table. The page says the stands are ASME PASE-2019 compliant. We like them for buyers who want a stated safety standard on the product page and a higher reach than the BIG RED.
Warranty: 1 year
Check Price on Amazon →BIG RED T43002 Torin 3 Ton Steel Jack Stands (Pair)
$35.99 as of Oct 18, 2026, 7:13 am CT on Amazon · Lowest price
Best for: occasional DIYers who want a 3 ton pair for tire and brake jobs on cars
Torin’s manual for its BIG RED jack stands lists the T43002 at 3 tons with an 11-1/4 to 16-3/4 inch range and a ratchet bar that locks against a pawl, and says to use the stands as a matched pair only. Torin’s older T43002 manual gives a 6,000 pound capacity per pair. The Amazon listing gives the pair weight. We like it for the price: it costs well under half of the others.
Warranty: 1 year limited
Check Price on Amazon →Our Take
Pick the Hein-Werner HW93503 for the most height, the largest base and a 2 year warranty. Pick the Sunex 1003C if you want stands whose page states ASME PASE-2019 compliance. Pick the BIG RED T43002 if you need a basic 3 ton pair at the lowest price. Whichever you choose, use the stands as a pair on hard, level ground and never rely on the jack alone.
More Garage Guides: All Garage Guides · Best Pancake Air Compressors 2026 · Best Garage Heaters 2026 · Best Cordless Tire Inflators 2026 · Best Battery Maintainers 2026 · Best Torque Wrenches 2026 · Best Garage Door Openers 2026 · Best Cordless Impact Wrenches 2026 · Best Socket Sets 2026 · Best Jump Starters 2026 · Best Shop Vacs 2026 · Best Electric Pressure Washers 2026 · Best Cordless Drill Combo Kits 2026 · Best Mechanic Creepers 2026 · Best Oscillating Tools 2026
Frequently Asked Questions
What size jack stands do I need?
For most cars and small SUVs, a 3 ton pair is a common choice. Check the vehicle weight and the height of its lift points: the Hein-Werner reaches 19 inches, the Sunex 17 inches and the BIG RED 16-3/4 inches.
Is the 3 ton capacity per stand or per pair?
Hein-Werner and Torin state that the capacity is per pair. Sunex lists a 3 ton load capacity on its page without saying per pair or per stand.
What is the difference between ratchet and pin jack stands?
All three here are ratchet stands: a toothed bar locks against a pawl at each step. Pin stands use a steel pin through the column instead. Whichever type you use, make sure the lock is fully engaged before you load the stand.
Are these jack stands certified?
Sunex states that the 1003C is ASME PASE-2019 compliant on its product page. The manufacturer pages and manuals we read for the HW93503 and the 3 ton BIG RED T43002 do not state a certification.
What warranty do they have?
Hein-Werner lists a 2 year limited warranty. Torin lists a 1 year limited warranty for BIG RED stands, and Sunex lists 1 year for the 1003C.
